Antaira Technologies - Industrial Ethernet Switches
LMP-1002G-10G-SFP-24 Hardware Manual V1.0
13
4.2 Maintenance and Service
•
If the device requires servicing of any kind, the user is required to disconnect and remove it from its
mounting. The initial installation should be done in a way that makes this as convenient as possible.
•
Voltage/Power lines should be properly insulated as well as other cables. Be careful when handling
them so as to not trip over.
•
Do not under any circumstance insert foreign objects of any kind into the heat dissipation holes
located in the different faces of the device. This may not only harm the internal layout, but might
cause harm to the user as well.
•
Do not under any circumstance, open the device for any reason. Please contact your dealer for any
repair needed or follow the instructions within the manual.
•
Clean the device with dry soft cloth.
