Antaira Technologies - Industrial Ethernet Switches
LMP-1002G-10G-SFP-24 Hardware Manual V1.0
6
2.4 LED Indicators
There are LED light indicators located on the front panel of the industrial Ethernet switch
that display the power status and network status. Each LED indicator has a different color
and has its own specific meaning, see below in
Table 2.1
.
LED
Color
Description
Power 1
Green
On
Power input 1 is active
Off
Power input 1 is inactive
Power 2
Green
On
Power input 2 is active
Off
Power input 2 is inactive
Status
Green
On
The system ready and work fine, and
there are no events occur
Red
On
System booting or an applied alarm (such
as port disconnect) has been triggered
Master
Green
On
ERPS Owner Mode (Ring Master) is ready
Off
ERPS Owner Mode is not active
Ring
Green
On
Ring Network is active
Off
Ring Network is not active
LAN Port
1~8
(Upper LED)
Green
On
Connected to network, 10/100/1000Mbps
Flashing Networking is active
Off
Not connected to network
LAN Port
1~8
(Lower LED)
Green
On
The port is supplying power to the
powered-device
Off
No powered-device attached or power
supplying fails
LINK/ACT
(SFP Port
9~10)
Green
On
Connected to network, 10Gbps
Flashing Networking is active
Off
Not connected to network
Amber
On
Connected to network, 1Gbps
Flashing Networking is active
Off
Not connected to network
Table 2.1 - LED Indicators for LMP-1002G-10G-SFP-24
Caution:
"P1" is the abbreviation for "Power 1",
“P2” is for “Power 2”, “LNK” is for “Link”,
and "ACT" is for "Activity".
2.5 Reset Button
