ANTAIRA LMP-0800G Series, Hardware Manual

Page: 6 / 18

Antaira Technologies - Industrial Ethernet Switches
LMP-0800G Series Hardware Manual V1.2
2
HTTPS, SSH/SSL, TFTP

MODBUS TCP for SCADA system integration
Port Configuration 

Status, statistics, mirroring, rate limiting, event syslog
Event Handling 

Event notification by Email: Cold/Warm Start, Power Failure, Authentication, SNMP
trap and Fault Alarm Relay Output
Software Upgrade via TFTP and HTTP

Configuration Backup – USB Port

1.3 Product Hardware Features
System Interface and Performance

 All RJ-45 ports support Auto MDI Function
 Embedded 8*10/100/1000Tx (PSE 30W/Port) RJ45 Ports
 Store-and-forward switching architecture

8K MAC address table
 Power line EFT protection: 2,000VDC; Ethernet ESD protection: 6,000VDC
Power Input 

DC 48~55V redundant with a 6-pin removal terminal block

One user programmable alarm relay contact
 The power input specification is complied with the requirements of SELV (Safety Extra Low
Voltage), and the power supply should be complied with UL 61010-1 & UL 61010-2-201
Operating Temperature

 Standard operating temperature models: -10°C to 70°C
 Extended operating temperature models: -40°C to 75°C
Case/Installation


IP-30 protection metal housing

DIN-Rail and wall mount design
 Installation in a Pollution Degree 2 industrial environment