background image

Antaira Technologies - Industrial Ethernet Switches 

LMP-0800G Series Hardware Manual V1.2 

 

 

1. Introduction 

All Antaira industrial managed switches come with a pre-installed “user-friendly” web console 

interface, which allows users to easily configure and manage the units, whether one is using a serial 

console and command line interface (CLI) commands like Telnet, SSH, HTTP (Web GUI) or simple 

network management protocols (SNMP). 

 

1.1 Product Overview 

Antaira Technologies’ LMP-0800G series is a 8-port industrial Gigabit PoE+ managed Ethernet 

switch embedded with 8*10/100/1000Tx Ethernet ports that support IEEE802.3at/af for a maximum of 

30W/port. It is a fully manageable Layer 2 Ethernet switch that is pre-loaded with a user-friendly web 

management console design. It supports the ring network redundancy function using the market’s 

open standard ITU-T G.8032 ERPS (Ethernet Ring Protection Switch) protocol that has a <50ms 

network recovery time. The advanced network filtering and security functions, such as, IGMP, VLAN, 

QoS, SNMP, RMON, ModbusTCP, and 802.1X/HTTPS/SSH/SSL increase determinism and improve 

network management for remote SCADA systems or control networks. 

 

The LMP-0800G series is IP30 rated and DIN-rail mountable. There are also two wide operating temperature 

models for either a standard temperature range (STD: -10°C to 70°C) or an extended temperature range (EOT: - 

40°C to 75°C). It also provides high EFT and ESD protection for industrial networking applications, such as, 

power/utility, water wastewater, oil/gas/mining, factory automation, security surveillance, ITS and any other 

outdoor or harsh environment. 

 

1.2 Product Software Features 

 

Network Redundancy

 

STP, RSTP, MSTP, ITU-T G.8032 Ethernet Ring Protection Switch (ERPS) for 

network redundancy 

 

Network Management

 

Web UI based management, SNMP v1/v2/v3, Serial Console 

 

Qos, traffic classification QoS, Cos, bandwidth control for Ingress and Egress, 

broadcast storm control, Diffserv 

 

IEEE802.1q VLAN tagging, port-based VLAN support 

 

IGMP snooping v1/v2, IGMP filtering / throttling, IGMP query up to 256 group 

 

Supports IPv4/IPv6, RMON, MIB II, port mirroring, event syslog, DNS, NTP/SNTP, 

Summary of Contents for LMP-0800G Series



















Reviews: