Antaira Technologies - Industrial Media Converter
IMP-C1000-SFP-bt Series User Manual V1.0
15
6. Technical Specifications
Table 6.1
has the technical specifications for Antaira Technologies
’ IMP-C1000-SFP-bt series.
Standards
IEEE 802.3
10BaseT Ethernet
IEEE 802.3u
100BaseTX Fast Ethernet
IEEE 802.3ab
1000BaseT Gigabit Ethernet
IEEE 802.3z
1000Base-X Gigabit Fiber
IEEE 802.3af/at/bt
Power over Ethernet
Technology
Data Process
Store and Forward
Protocol
CSMA/CD
Flow Control
IEEE 802.3x flow control, back pressure control
Memory Buffer
1Mbit
Jumbo Frame
10Kbytes
MAC Table Size
8K
Port Interface
Ethernet (RJ45) Port
1*10/100/1000Tx with IEEE 802.3bt PoE
Auto-Negotiation, Full/Half Duplex, Auto-MDI/MDI-X
PoE Pin Out
V-, V-, V+, V+, for pin 1, 2, 3, 6; V+, V+, V-, V-, for pin 4, 5, 7, 8
*Support Modes: Mode A, Mode B, 4-Pair Mode
Fiber Port
1*100/1000Fx SFP Slot
Fiber Wavelength
Refer to SFP Module
DIP Switch
DIP Switch 1: PD Remote Reset Technology (PRRT) Enable/Disable
DIP Switch 2: Link Fault Pass-Through (LFP) Enable/Disable
DIP Switch 3: 100Mbps/1000Mbps
LED Indicators
Power Status LED, IEEE 802.3af/at PoE Enabled LED, IEEE 802.3bt
Enabled LED
Ethernet Ports: On-Link/Flash-data transmitting
SFP: Link/Active
Mechanical
Characteristics
Housing
Metal IP30 protection
Dimension
30 x 95 x 75 mm
Weight
Unit Weight: 0.59 lb. Shipping Weight: 0.81 lb.
Mounting
DIN-Rail Mounting, Wall Mounting
Power
Requirement
Input Voltage
48~55VDC Redundant Input
*For IEEE802.3bt applications, power supply not less than 53V is
recommended.
Power Connection
1 removable 4-contact terminal block
Power Consumption
3W
Max. PoE Power
Budget
90W
Environmental
Limits
Operating Temperature
Standard: -10
˚C to 65˚C
EOT: -40
˚C to 75˚C
Ambient Relative
Humidity
5% to 95%, (non-condensing)
Storage Temperature
-40
˚C to 85˚C
Regulatory
Approvals
EMI
FCC Part 15 Subpart B Class A,
CE EN55032/EN61000-6-4 Class A
