Antaira Technologies - Industrial Media Converter
IMP-C1000-SFP-bt Series User Manual V1.0
7
▪
To connect the transceiver and LC cable, please follow the steps below:
o
Step 1 -
Insert the SFP transceiver module into the SFP slot as shown below in
Figure 2.7
. Notice that the triangle mark is at the bottom of the SFP slot.
Figure2.8
shows the SFP transceiver module was inserted.
o
Step 2 -
Insert the fiber cable of the LC connector into the transceiver as shown
below in
Figure 2.9
.
Figure 2.7 - Transceiver to the SFP Slot
Figure 2.8 - Transceiver Inserted
Figure 2.9 -
LC Connector to the Transceiver
