7
25/4Mbps for asymmetric data rate at 1.6km. The performance
of EVC-3010 (BNC) is up to 100/65Mbps for asymmetric data
rate within 200m and up to 25/5Mbps for asymmetric data rate
at 3.0km. This capability is ideal for use as an Ethernet extender
for the existing Ethernet network.
Antaira VDSL2 Converter provides a much cost effective
replacement and smooth migration for existing
Long Reach
Ethernet (LRE) networks.
The cable specifications of the connection are listed as following:
10Base-T, Category 3, 4 or 5 UTP
l
100Base-TX, Category 5, 5e or 6 UTP
l
Ethernet over VDSL2, Twisted-pair telephone wires
l
Ethernet over VDSL2, Coaxial cable
l
The two drawings pictures are typical application for the Ethernet
over VDSL2 Converter.
Note
Slave device (CPE) must connect to Master device
(CO) through the telephone wire or coaxial cable.
It is not allow connecting like Master to Master
or Slave to Slave. To define the EVC-3001 /
EVC-3010 to CO or CPE, please refer to section
2.2.1 for more detail.
