Ansul INERGEN 150-BAR, Manual

Page: 59 / 92

System Components
UL EX-4510 11-1-00 Page 1-15.3
REV. 1
Description
Orifice plate shipping assemblies are available as replace-
ment plates. Replacement plates may be required in situa-
tions where the piping and pressure reducer size can stay
the same but because of some hazard change, the size of
the orifice in the pressure reducer must change.
The orifice size must be specified when ordering the orifice
plate.
NOTE: Replacement orifice plates for orifice nipples are
not available as the plate is a permanent fixture of
the part.
NOTE: Refer to “Nozzle/Pressure Reducer Range Chart” in
Design Section for detailed orifice range inform -
ation.
ANSUL and INERGEN are trademarks of Ansul Incorporated or its affiliates.
Orifice Plate
Part No. Description
418095 1/2 in. Replacement Orifice Plate
418096 3/4 in. Replacement Orifice Plate
418097 1 in. Replacement Orifice Plate
418098 1 1/4 in. Replacement Orifice Plate
418099 1 1/2 in. Replacement Orifice Plate
418100 2 in. Replacement Orifice Plate
426984 2 1/2 in. Replacement Orifice Plate
426985 3 in. Replacement Orifice Plate
426986 4 in. Replacement Orifice Plate
TYCO SAFETY PRODUCTS, MARINETTE, WI 54143-2542 715-735-7411 Form No. F-99039-1 © 2001 Ansul Incorporated
ANSUL
®