Ansul INERGEN 150-BAR, Manual

Page: 45 / 92

System Components
UL EX-4510 2-1-12 Page 1-12
REV. 6
Description
The valve Flexible Discharge Bend (Part No. 427082) is a
5/8 in. (1.59 cm) I.D. extra-heavy flexible hose which con-
nects the valve discharge outlet to the fixed piping or head-
er manifold. The discharge bend has a special female
thread for connecting to the valve outlet and a male 1/2 in.
NPT thread for connecting to the fixed piping or manifold.
The discharge bend will withstand a pressure of 9000 psi
(621 bar). Its flexible connection allows for easy alignment
of multiple cylinder banks to fixed piping. Each bend has a
built-in check valve that prevents loss of agent should the
system discharge while any cylinder is removed.
The equivalent length of this hose is equal to 18 ft (5.5 m)
of 1/2 in. Sch. 40 pipe.
Flexible Discharge Bend
Shipping Assembly
Part No.
Description
427082 Flexible discharge bend
842430 Washer
Thread Size/Type
Component Material Valve End Manifold End Approvals
5/8 in. Flexible SAE 100 R2 Special to mate 1/2 in. NPT Male UL Listed (EX-4510);
Discharge Bend Type AT mate with CV90 Listed for use with FM Approved
and CV-98 Valve systems
ANSUL
®
18 7/8 IN.
(47.9 cm)
MANIFOLD/END
000658
1/2 IN. NPT
MALE COUPLING
FEMALE ADAPTOR
(BRASS)
VALVE END
CHECK
WASHER
SWAGE ON
Copyright © 2012 Tyco Fire Products LP.
All rights reserved.
Form No. F-9306-08
One Stanton Street +1-715-735-7411
Marinette, WI 54143-2542 www.ansul.com