www.ansmann.de
31
ORIGINAL OPERATING INSTRUCTIONS RM7.0 - ELECTRIC DRIVE FOR PEDELECS
GB
ENGLISH
7. INSTALLING THE BATTERY HOLDER
The battery holder is factory-equipped with a connector plug for the bat-
tery and the connecting cables for the motor and display. The holder is
tightened to the bottle holder fittings on the down tube of the bicycle ba-
sed on the design option. TX25 M5x16 countersunk screws are included for
this purpose. Before installing the holder, affix the included rubber strips at
the designated places on the bottom of the holder.
To ensure that the holder sits securely and to prevent it from
getting damaged, reduce the distance between the bottle hol-
der fittings and the battery holder by adding washers. If the
bottle holder fittings are flush with the tube, add 3 washers to
each; if the fittings are one washer thickness above the tube,
add 2 washers to each (see image).
tightening torque: 3Nm
