Anslut 416121, Operating Instructions Manual

Page: 107 / 117

EN
107
Pressure relief valve set
The pressure relief valve set includes a pressure relief valve,
ventilating valve and water pressure gauge.
1. Apply sealing tape according to the industry standard on the
threads of all valves.
2. Fit the pressure relief valve set on the connections (see
markings) on top the tank.
3. Connect the drainage pipe to the pressure relief valve.
4. Once the pressure relief valve set is mounted, loosen the
small screw cover on top of the ventilating valve so the air
can flow out.
FIG. 20
Pipe routing for the mixing valve
NOTE:
•
For the connection of hot water heaters that do not belong
to the same series as the heat pump, a mixing valve or
temperature limiter must be used on the heat pump’s hot
water outlet.
• Support sleeves are required if copper press fittings or
compression ring connectors are used on the supplied pipe
ends.
1. Connect the pipes to both inlets on the mixing valve.
2. Connect the pipes to the hot water outlet for high and the
hot water outlet for medium temperature.
1. Hot tap water outlet, medium temperature
2. Tap hot water outlet, high temperature
FIG. 21