EN
43
ASSEmBLING THE DEcORATION pANEL
1
Put the hot water heater in place and make sure that it is situated horizontally
2
Connect the pipes to the heater system in accordance with local regulations (figure 5)
3
Attach the decoration panel to the hot water heater when pipe installation is complete (figure 6)
INSULATION
• All hot and cold water pipes must be well-insulated (figure 7)
• The insulation must be completely impermeable However the check valve must not be insulated –
it must remain accessible for maintenance
6
7
A Connection to hot water heater
B Cold water inlet
C Max 07 MPa, min 01 MPa
Max inlet water pressure: 07 MPa
Min inlet water pressure (if this is required for the correct use of the hot water heater): 01 MPa
A
B
C
5
