EN
38
SAfETY INSTRUcTIONS
Read the operating instructions carefully before use!
Save these instructions for future reference
• The hot water heater may not be used by persons (including children) with reduced physical,
sensory or mental capabilities or those who lack relevant experience and knowledge They
should supervised and instructed by a person responsible for safety Children should be
supervised to ensure that they do not play with the hot water heater
• The hot water heater may only be installed, disassembled and maintained by a qualified
technician Any alteration to the design of the hot water heater is prohibited This may result in
personal injury or material damages
• Install a mixing valve before the tap and set the correct temperature if the hot water heater is to
be used together with a shower Use caution so as not to burn yourself
• Never touch the power plug with wet hands Never pull out the power plug by pulling on the
power cable
• A loose or damaged power cable should be repaired by a qualified technician
• The hot water heater should be connected to an expansion tank with a pressure and size
appropriate for the system pressure, total water volume and the differences in water
temperatures in the system
• The technician is responsible for correctly installing the system and adjusting the relevant heating
system in accordance with applicable regulations
TEcHNIcAL DATA
Max pressure
10 bar
Release pressure for safety valve
25 bar
Electricity supply
220 V/single phase/50 Hz/10 A
Water volume
200 litres
Inner case, material
Stainless steel (304)
Outer case, material
Lacquered steel
Insulation, material
Polyurethane foam
Insulation, thickness
50 mm
Hot water coil, material
Stainless steel (304)
Hot water coil, diameter
22 mm
Hot water coil, length
40 m
Thermostat, range of settings
30-75°C
Max water temperature
90°C
Water connection
G3/4”
Operating instructions for
multifunctional water tank
ENGLISH
