EN
11
5. Put the protective sleeves on the wires in
the power cord. Make sure that they cover
the wires.
6. Connect the wires to the terminal block on
the light.
7. Screw in the light source.
8. Fit the glass and the grille.
MAINTENANCE
IMPORTANT:
Make sure that the light is not connected to
the mains when cleaning or replacing the
light source.
REPLACING THE LIGHT SOURCE
1. Make sure the mains supply is
disconnected.
2. Release the grille and glass.
3. Unscrew the old light source. Make sure
that it has cooled first.
4. Screw in the new light source.
5. Fit the glass and the grille.
Summary of Contents for 006148
Page 3: ...1 1 2 3 4 5 6 7 ...
