2.1 Preparing Waveform Pattern
2-5
2
Ho
w
to U
se W
av
ef
or
m
P
att
er
ns
2.1.4 Selecting waveform pattern
Select a waveform pattern to use for modulation from the waveform
patterns loaded into the waveform memory of the MG3710A/MG3710E
according to 2.1.3 “Loading to waveform memory”. A waveform pattern
can be selected in the following two ways.
■
Configuring using the MG3710A/MG3710E
Waveform patterns to be used for modulation can be selected by using
the instruction panel of the MG3710A/MG3710E or by using a remote
command.
For operation using the front panel, refer below:
●
MG3710A/MG3710E Operation Manual
7.3.5 “Selecting output waveform pattern: Select”
For operation using remote commands, refer below:
●
MG3710A/MG3710E Operation Manual
7.3.5 “Selecting output waveform pattern: Select”
■
Using Transfer & Setting Panel of IQproducer™
A waveform pattern can be loaded from the LAN-connected PC to the
memory, and also selected for modulation. This is done by using Transfer
& Setting Panel, which can be opened from the Simulation & Utility tab.
For details, refer to 4.6 “File Transfer and Loading to Memory in
Transfer & Setting Panel Screen” in the
MG3710A/MG3710E
IQproducer™.
Summary of Contents for MX371054A
Page 14: ...Chapter 1 Overview 1 4 ...
