IP Network Measurement Division
47
40G Quick Start Guide
（
Jitter
）
2.
2.
GPIB Setup
GPIB Setup
MP1800A and MP1797A are controlled using MX179701B control software.
(1) Connect the MP1800A and MP1797A to the PC in which the MX179701B is installed using a GPIB cable.
(2) Switch on the power of the MP1800A, MP1803A, MP1804A and MP1797A.
(3) Check the GPIB address of all equipments. If same GP-IB addresses, change the address of one unit.
MP1800A 4ch PPG and ED: Selector
→
Setup Utility
→
Remote Control
MP1797A: Setup screen
→
System
(4) Start the MX179701B software and launch the Interface setup screen from File
→
Interface.
(5) After changing the Device setting to MP1797A
＋
MP1800A,
check the GPIB addresses as described in step (3).
Device
GPIB Address
IP Network Measurement Division
48
40G Quick Start Guide
（
Jitter
）
3.
3.
Common Settings with MX179701B
Common Settings with MX179701B
Start the MX179701B and select the Bit Rate and measurement items.
Bit rate Setting
Measurement Items
24