15
Ordering Information
Models
MG3691B
2 – 10 GHz Signal Generator
MG3692B
2 – 20 GHz Signal Generator
MG3693B
2 – 30 GHz Signal Generator
MG3694B
2 – 40 GHz Signal Generator
MG3695B
2 – 50 GHz Signal Generator
MG3696B
2 – 67 GHz Signal Generator (operational to 70 GHz)
Options and Accessories
MG3690B/1A
Rack Mount with slides – Rack mount kit containing a set of track
slides (90 degree tilt capability), mounting ears, and front panel
handles to let the instrument be mounted in a standard 19-inch
equipment rack.
MG3690B/1B
Rack Mount without slides – Modifies rack mounting hardware
to install unit in a console that has mounting shelves. Includes
mounting ears and front panel handles.
MG3690B/2X
Mechanical Step Attenuator – Adds a 10 dB/step attenuator. Rated
RF output power is reduced. (This option comes in different ver-
sions, based on instrument configuration.)
MG3690B/2E
Electronic Step Attenuator – Adds a 10 dB/step electronic attenuator
with a 120 dB range for the MG3691B. Rated RF output power
is reduced. (Not available with Option 20 or 22.)
MG3690B/3
Ultra Low Phase Noise, main band – Adds new modules to
significantly reduce SSB phase noise. (Not available with Option 30.)
MG3690B/4
10 MHz to 2.2 GHz RF coverage, Ultra-Low Phase Noise
version – Uses a digital down converter to significantly reduce
SSB phase noise.
MG3690B/5
10 MHz to 2 GHz RF coverage – Uses an analog down converter.
MG3690B/6
Analog Sweep Capability – (limited to ≥500 MHz when used
with Option 4.)
MG3690B/7
IF Up-Conversion – Adds an internal 40 GHz mixer for up-converting
an IF signal. (Not available with MG3695B, MG3696B, or
with Options 18 or 20.)
MG3690B/8
Power Monitor – Adds internal power measurement capability.
(Not available with Option 9.)
MG3690B/9X
Rear Panel Output – Moves the RF output connector to the rear
panel. (This option comes in different versions, based on instrument
configuration.) (Not available with Option 8.)
MG3690B/10
User-Defined Modulation Waveform Software – External software
package provides the ability to download user-defined waveforms
into the memory of the internal waveform generator, serially or via
GPIB. External PC and an instrument with LF Generator, Option 27,
are required.
MG3690B/12
Frequency and Phase Modulation – External, via a rear panel BNC
connector. For internal modulation capability, requires additionally
LF Generator, Option 27.
MG3690B/14
Amplitude Modulation – External, via a rear panel BNC connector.
For internal modulation capability, requires additionally
LF Generator, Option 27.
MG3690B/15X
High Power – Adds high-power RF components to the instrument
to increase its output power level. (This option comes in different
versions, based on instrument configuration.)
MG3690B/16
High Stability Time Base – Adds an ovenized, 10 MHz
crystal oscillator as a high-stability time base.
MG3690B/17
Delete Front Panel – Deletes the front panel for use in remote
control applications where a front panel display and keyboard
control are not needed. (Only available with Options 1A or 1B)
MG3690B/18
mmW Bias Output – Adds a rear panel BNC Twinax connector
required to bias the 63850 series millimeter wave source modules,
sold separately. Includes DC bias cable. (Not available with
Option 7 or 15x)
MG3690B/20
Scan Modulation – Adds an internal Scan modulator for
simulating high-depth amplitude modulated signals. Requires an
external modulating signal input capability. (Not available on models
MG3693B, MG3694B, MG3695B, MG3696B, or with Options 2E,
7, 15X, or 22.)
MG3690B/22
0.1 Hz to 10 MHz Audio coverage – Uses a DDS for coverage down
to approximately DC. When adding Option 22, the output power is
derated by 2 dB. The frequency resolution below 10 MHz is 0.02 Hz.
No modulation is available in the 0.1 Hz to 10 MHz band.
(Not available without Option 4 or 5, or with Option 20 or 2E)
MG3690B/26X
Pulse Modulation – External, via a rear panel BNC connector.
For internal modulation capability, requires additionally Pulse
Generator, Option 27. (This option comes in different versions,
based on instrument configuration.)
MG3690B/27
Internal LF and Pulse Generators – Provides modulation waveforms
for internal AM, FM, FM, and Pulse. (Not available without
Option 12, 14, or 26.)
MG3690B/28X*
Analog Modulation Suite – For ease of ordering and package
pricing, this option bundles Options 12, 14, 26 and 27, offering
internal and external AM, FM, FM, and Pulse Modulation.
(This option comes in different versions, based on
instrument configuration.)
MG3690B/30
Low Phase Noise. (Not available with Option 3.)
MG3690B/37A
Performance Suite – For ease of ordering and package pricing, this
option bundles Options 2A, 5 and 28A, offering 10 MHz to 20 GHz
frequency range, Step Attenuator and Analog Modulation Suite.
MG3690B/38A
Ultra Performance Suite – For ease of ordering and package pricing,
this option bundles Options 2A, 3, 4, 15A, 22 and 28A, offering
0.1 Hz to 20 GHz frequency range, Step Attenuator, Ultra Low
Phase Noise, High Power and Analog Modulation Suite.
MG3690B/39X
CW Power Meter and Sensor Bundle – This bundle adds an
ML2437A Power Meter with no options and an appropriate power
sensor to the Synthesizer order.
Option
Sensor
Available with
39A
MA2472D, 18 GHz
MG3691B
39B
MA2473D, 32 GHz
MG3692B, MG3693B
39C
MA2474D, 40 GHz
MG3694B
39D
MA2475D, 50 GHz
MG3695B, MG3696B
MG3690B/40
Pulse Power Meter and Sensor Bundle – This bundle adds an
ML2495A Pulse Power Meter and MA2411B Pulse Power Sensor
for models MG3691B, MG3692B, MG3693B, and MG3694B.
