Anritsu MA24 A Series, Operation Manual, Page: 18 / 88

1-4 PN: 10585-00004 Rev. T MA24xxA/B/D, MA2400xA OM
1-4 Identification Numbers Chapter 1 — General Information
1-4 Identification Numbers
An Anritsu model number and serial number is located on the power
sensor. Please use these numbers when corresponding with Anritsu
Customer Service.
1-5 Online Manual
This manual is available online at www.anritsu.com.
1-6 Test Equipment List
Table 1-2 provides a list of recommended test equipment needed for the
performance verification procedures presented in this manual. The test
equipment setup is critical to making accurate measurements. In some
cases, you may substitute test equipment having the same critical
specifications as the test equipment indicated in the test equipment list
(refer to
“Measurement Uncertainty” on page 4-8 and “Cal Factor
Uncertainty” on page 4-11 ).
Table 1-2. Test Equipment List (1 of 2)
Instrument Critical Specification
Manufacturer
and Model
Usage
( a )
Vector Network
Analyzer
Measurement uncertainty
equal to or lower than
that given in the tables of
Section A-4 of
Appendix A
Anritsu 37000
Vector Network
Analyzer
P, T
Scalar Network
Analyzer
Measurement uncertainty
equal to or lower than
that given in the tables of
Section A-4 of
Appendix A
Anritsu 54000
Scalar Network
Analyzer
P, T
Attenuator:
20 dB Attenuation accuracy
±0.5 dB at 2 GHz or
better (required for
testing the Universal
power sensor) Anritsu 41KC-20
Fixed Attenuator
P, T