Anritsu MA24 A Series, Operation Manual, Page: 10 / 88

Safety-4 PN: 10585-00004 Rev. T MA24xxA/B/D, MA2400xA OM
Caution
Electrostatic Discharge (ESD) can damage the
highly sensitive circuits in the instrument. ESD is
most likely to occur as test devices are being
connected to, or disconnected from, the
instrument’s front and rear panel ports and
connectors. You can protect the instrument and test
devices by wearing a static-discharge wristband.
Alternatively, you can ground yourself to discharge
any static charge by touching the outer chassis of
the grounded instrument before touching the
instrument’s front and rear panel ports and
connectors. Avoid touching the test port center
conductors unless you are properly grounded and
have eliminated the possibility of static discharge.
Repair of damage that is found to be caused by
electrostatic discharge is not covered under
warranty.