background image

 

 

e1 

Preface 

Thank you for purchasing this product from 
ANRITSU METER CO., LTD.  
We prepared this manual so that you can use this 
product with ease and confidence. 
Please read this manual  carefully and understand 
each functions of this product for your safety and 
correct using. 
 

Caution 

■ 

This contents and the specification of this 
product are subject to change without notice. 

■ 

Reproduction in part or whole of any material 
from this booklet is prohibited by low. 

■ 

We surely make this manual, however if there 
are any error or not clear, please contact the 
place of purchase or us. 

■ 

We are not responsible for the consequences of 
using this product.   

 

After-sales Service 

   ANRITSU METER CO., LTD. ships products 

after severe company’s inspection. Should you 
find any failure resulting from poor material and 
workmanship or accident during transportation, 
please contact the place of purchase or us. 

 

We recommend that you may use the original 
packaging for this product when you send it to us 
for repairing or periodical checkup. If you no 
longer have the original carton, be sure to use 
plenty of wrapping to guard against damage 
during shipping. 

 
 

 
 

Summary of Contents for HA-100 Series






























Reviews: