4. Press
the
Ethernet Configuration
soft key.
•
If your instrument is configured for DHCP, it will immediately attempt to obtain
(lease) an IP address from the network DHCP server and display it at the bottom
left hand corner of the screen. If successful, note and write down the address,
press the
Back
soft key and go to step #7.
•
If the test instrument cannot obtain an IP address from the DHCP server, it will
time out in approximately after 3 minutes. The statement “DCHP Lease Failed”
will be displayed at the bottom left hand corner of the screen.
Go to
Step 4a
,
DHCP Mode 2
nd
Attempt.
•
If your instrument is configured for STATIC IP, it will open to the Static IP
configuration window displaying the current Static IP address at the bottom left
hand corner of the screen. To reconfigure the Static IP address,
go to Step 4b
,
Static Address Mode.
a.
DHCP Mode 2
nd
Attempt
i. Press the 1st soft key. (No text describes it.) The Static IP configuration
window opens.
ii. Confirm that the connections, the Ethernet line and communication on
the LAN to the test instrument are OK.
iii. Re-attempt to obtain an IP address through DHCP configuration. Press
the 1
st
soft key, Toggle the address mode (DHCP/Static), to switch to
DHCP configuration and automatically obtain an IP address. Note the IP
address assigned to the instrument.
iv. Press
the
Back
soft key. Return to the main bootstrap screen and
go to
Step #5
.
b.
Static Address Mode
i. Press the 2nd soft key. Enter the IP address.
ii. Press the 3
rd
soft key. Enter the gateway address.
iii. Press the 4
th
soft key. Enter the subnet mask.
iv. Attach the Ethernet cross-over cable between the test instrument and
your PC.
v. Press
the
Back
soft key, to return to the main bootstrap screen.
5. Press
the
Update OS (Ethernet)
soft key. The unit should give you a "Waiting for OS
download connection…" message.
2