Anritsu BTSMaster MT8222A Firmware Update Download Page 4

Page: 4 / 4

If a zip file was sent to you from Anritsu Company –

a. Copy it to the MST folder. (Default location is

C:\Program Files\Anritsu\Anritsu

Master Software Tools\Archives

)

b. Select the box next to

Show Obsolete Files

at the bottom of the

Product

Updates

screen. This updates the list.

9. Click

the

Emergency Repair

button. The

OS Recovery

window will open.

10.

Click the

Ethernet

button.

a. Enter the IP address of the instrument.

b. Click

the

Install New OS Now

button. Master Software Tools will connect to your

instrument and proceed to install the firmware. Progress messages will appear

above the buttons. Be patient, the installation can take many minutes.

11. When it is done loading the new OS firmware, the instrument should automatically

reboot. If it does not re-boot, power the instrument off then on. The instrument should

start up normally.

Summary of Contents for BTSMaster MT8222A

Page 1: ...y If you have an instrument that fails to boot after a failed firmware update use the following steps to resolve the problem 1 Close Master Software Tools and then re open it 2 Power off the instrumen...

Page 2: ...o Step 4b Static Address Mode a DHCP Mode 2nd Attempt i Press the 1st soft key No text describes it The Static IP configuration window opens ii Confirm that the connections the Ethernet line and commu...

Page 3: ...on the PC and the Emergency Repair button is active If the file status is listed as Available click on the Retrieve File button to download the file from the Anritsu website to your PC Once the file h...

Page 4: ...OS Recovery window will open 10 Click the Ethernet button a Enter the IP address of the instrument b Click the Install New OS Now button Master Software Tools will connect to your instrument and proce...