13
Programming procedure:
1. Enter "EdI." menu
. Press [UP] or [DOWN] to select the desired program which you wish to edit and press [ENTER].
3. Press [UP] or [DOWN] to select the desired program step ("S.01" - "S.30") and press [ENTER].
4. Press [UP] or [DOWN] to select the desired item and press [ENTER]-button.Now you can edit by using [UP]
or [DOWN] buttons the DMX values selected item (the list of items depends on selected DMX mode):
End. -
a total number of the program steps (value 1-30).This value you must set before start programming(e.g.
if you want to create program with 10 steps,set End=10).
rE1
- a red LED 1 saturation, value 0-55
rE2
- a red LED saturation, value 0-55
Gr1
- a green LED 1 saturation, value 0-55
Gr2
- a green LED saturation, value 0-55
bL1
- a blue LED 1 saturation, value 0-55
bL2
- a blue LED saturation, value 0-55
Wh1
- a white LED 1 saturation, value 0-55
Wh2
- a white LED saturation, value 0-55
Following item are common for all zones:
MAC.
- a macro selection,value 0-55
Str.
- a strobe,value 0-55
dim.
- a dimmer,value 0-55
FA.t.
- fade time,value 0-55*
S.tI.
- standing time,value 0-55*
COP.
- copying the current prog. step to the next prog. step.
Press [ENTER]-button to confirm adjusted value.
5. Repeat steps 3 and 4 for next prog. step. If you want to copy current program step to the next prog. step,
select option „COP." and confirm it by pressing [ENTER].
*Both Fade time and Standing time use the same conversion table in order to convert DMX value to the time
value:
DMX
Time
[sec.]
DMX
Time
[min.]
DMX
Time
[min.]
DMX
Time
[min.]
DMX
Time
[min.]
1
0.1
50
4.
105
18.4
160
4.7
215
77
2
0.4
55
5
110
0.
165
45.4
220
80.7
5
.5
60
6
115
170
48.
225
84.4
10
10
65
7
120
4
175
51
230
88.
15
.5
70
8.
125
6
180
54
235
9
20
40
75
9.4
130
8.
185
57
240
96
25
6.5
80
10.7
135
30.4
190
60.
245
100
30
90
85
1
140
3.7
195
63.4
250
104
35
1.5
90
13.5
145
35
200
66.7
255
108
40
160
95
15
150
37.5
205
70
45
0.5
100
16.7
155
40
210
73.5
Exact expression of the time value follows the formula: time[sec.]=(DMX value)
/10.
8.3 Manual mode
This menu gives access to the control of the fixture channels by means of the control buttons.
Use [UP] and [DOWN] buttons until the display shows "
MAn.
" menu.Press [ENTER] button and by using [UP]
and [DOWN] buttons select desired effect,press [ENTER] and and by using [UP] and [DOWN] buttons adjust
desired DMX value for selected effect.Confirm by [ENTER].
rE1
- a red LED 1 saturation, value 0-55
rE2
- a red LED saturation, value 0-55
Gr1
- a green LED 1 saturation, value 0-55
Gr2
- a green LED saturation, value 0-55
bL1
- a blue LED 1 saturation, value 0-55
bL2
- a blue LED saturation, value 0-55
Wh1
- a white LED 1 saturation, value 0-55
Wh2
- a white LED saturation, value 0-55
MAC.
- a macro selection, value 0-55
Str.
- a strobe, value 0-55
dim.
- a dimmer, value 0-55
Summary of Contents for ArcPower 72/K2
Page 1: ...version 1 7...
