anko VCB45-16A, User Manual

Page: 11 / 15

7 Care and cleaning
1. Do not use alcohol, acetone, benzene, scouring cleaning agents, etc. to clean the
synthetic parts of the appliance. Do not use hard brushes or metal objects.
2. Do not immerse the appliance or power plug in water or any other liquids.
3. Wipe the outside of the appliance regularly with a slightly dampened cloth and dry
afterwards with a soft cloth.
7.1 Dust bag replacement
1. Hold the suction hose during operation up into
the air. If the dust bag full indicator (9) shows red,
the dust bag (21) is full and needs immediate
replacement.
2. Switch OFF the appliance and pull the plug from
the mains power outlet socket.
3. Pull the cover release button (25) and lift the cover (23)
until it locks in place(Fig.5)
4. Carefully pull upwards the dust bag holder (A)
including the dust bag. Fig.5
5. Slide the used dust bag out of the dust bag holder.
Dispose of the dust bag in accordance with local regulations.
6. Slide a new dust bag into the dust bag holder.
Pay attention to the arrow on the dust bag, which must point to the bottom of
the dust bag holder.
7. Reinsert the dust bag holder (A) with the dust bag carefully into the dust bag
compartment until it locks in place.
Align the dust bag evenly inside the compartment.
11