6 Operation
6.1 General use
1. Pull out the power cord (2) to the required length. Do not pull further than the
yellow marking on the power cord to avoid damage.
2. Insert the power plug into a suitable mains supply socket.
3. Choose the correct setting for the floor by pressing the brush in or brush out
switch (18).
Brush out:
wooden floors, titles, marble
Brush in:
carpets/textile surfaces
4. Turn on the appliance by pressing the ON/OFF switch (7).
5. Adjust the suction power by turning the suction power control button (8).
Also see section 6.2
“Suction power control settings”.
6. Vacuum clean at a steady speed. The wheels (1) will support an easy movement
of the appliance.
7. After use press the ON/OFF switch to switch the unit OFF.
8. Disconnect the plug from the mains socket.
9. Hold the plug securely in order to guide the power cord while pressing the cable
rewind button (4).
10. Pay attention to the range that can be covered with the cable length.
11. Always disconnect the power plug from the mains socket before rewinding the
cable.
9
Summary of Contents for VCB45-16A
Page 6: ...5 6 ...
