THERMAL PROTECTION
Your stand mixer motor is equipped with an automatic Thermal Protection feature
which will shut your motor off if it gets too hot. Should this occur, turn the speed
selector to Off, unplug the unit from mains power and allow it to cool down for 30
minutes before using it again. It is normal for the mixing head to become hot after
prolonged use.
CARE AND CLEANING
Before cleaning your Stand Mixer, ensure that the mixer is switched OFF and
disconnected from the mains power outlet. Wipe over the outside area of the Stand
Mixer including the head and base, with a damp cloth and then polish with a soft
dry cloth. Wipe any excess food particles from the power cord.
We recommend washing the mixing bowl, beater, whisk and dough hook in warm
soapy water and wipe dry - use a brush if necessary to remove any sticky food
particles.
Storage
Keep your Stand Mixer in a convenient position on your kitchen bench ready for
use at all times.
Place the beater, whisk and dough hook in the mixing bowl as storage of these
attachments in a drawer with other kitchen equipment may cause damage.
Note:
Never wind the power cord around the mixer after use as residual heat
from the motor may cause damage to the power cord. For added convenience
the unused cord length can easily be pushed into the base of the mixer for
storage.
Warning:
The max. continuous operation time is 10 minutes. Allow it to rest for few
minutes before using it again. Failure to follow the above instructions may cause
electric motor burnout.