anko MT-600, Instruction Manual

Page: 20 / 36

Page 20 of 36
Slide the back cover back on to the remote control and push all the way on
until it locks in place.
The remote control must be pointed at the front or rear of the Robot and inline
of sight for it to operate just like a TV remote control.
Note : If you try to use the remote control when the Robot is cleaning near
the charging dock, the Robot may not recognise the command as the
charging dock signals have priority to ensure the Robot does not hit the
charging dock.
10 Types of Floor Surfaces
The Robot is suitable for domestic use only, such as family homes, units, home
offices, etc. It is not for commercial use.
It is best suited for short pile carpet (0.5cm or less), wooden floors, tiled floors,
linoleum floors, sealed cork tiled floors etc.
Please note that the Robot does not “deep clean” carpet.
The Robot will sweep and pick up debris on the surface and just a few
millimetres below if on carpet.
To deep clean carpet, use a more substantial professional vacuum cleaner.
11 Using the Robot Cleaner
11.1 Start / Pause / Sleep
Start-up
•
Ensure the Battery is fully charged and the On / Off Switch on the side of
the Robot is in the “I” On Position.
•
Press the button on the control panel on top of the Robot or press
the
START/STOP
button on the remote control to start the Robot Cleaning
in Normal mode.
Note : If the Robot is in Sleep Mode, you will need to press the button a
second time. The first press will wake the Robot, the second press will
start the Robot.