Page 30 of 36
15 Storage
When finished using the Robot cleaner, either place back on the charging
stand to recharge the battery, or, store away in in a dry cool place.
If Storing away for a long period, ensure the battery in the Robot is fully
charged first, switch the Robot off by selecting the “O” Off Position on the
switch located on the side of the Robot, then disconnect battery from the
Robot.
Ensure the dust canister and filters are clean and dry.
Remove batteries from the remote control.
15.1 FAQ
Q: What if the strength of vacuuming is weak?
A: Check whether the dust canister is full, all filters are clean and the robot is
fully charged. Also check that the Rotary floor brush is free to rotate and
that there are no blockages.
If all looks okay, you can try to switch the robot to the higher TURBO mode.
For debris which is difficult to collect, try to clean the area with Spot
Cleaning Mode.
Q: What if the robot wont charge?
A: Ensure the battery charger is plugged into the wall socket and switched on.
Ensure the battery charger is plugged into the side of the Charging Dock
correctly.
Ensure the Charging contacts on the underneath of the Robot, and the
contacts on the charging dock are clean.
If you still cannot get the Robot to charger, plug the battery charger directly
into the side of the Robot and see if it charges. This will determine if you
have a faulty Battery Charger or a faulty Charging Dock.
Summary of Contents for MT-600
Page 2: ...Page 2 of 36 ...
Page 36: ...Page 36 of 36 ...
