IMPORTANT! To prevent damage to the exterior
* Do not use caustic, aggressive or abrasive cleaning products for cleaning the kettle exterior.
Cleaning
•
Remove the supply cord plug from the mains power outlet socket and let the water kettle
cool down completely.
•
Wipe the base and power cord with a dry cloth.
•
Wipe the outside of the jug with a slightly moistened cloth.
•
Pull the filter out of the spout and rinse it under running hot water.
•
Slide the filter back into the spout as far as it will go.
Descaling
IMPORTANT! During the below process, DO NOT fill the tea maker more than the MIN (0.5L)
mark on the tea maker. Filling above the MIN mark will cause overboiling and spillage out of the
spout.
The tea maker must be descaled at regular intervals, especially if the power base is visibly
encrusted with lime scale. Regular descaling saves energy and increases the service life of the
kettle.
We recommend using a three-to-one (3:1) solution of water and vinegar or citric acid to descale
the kettle.
Note:
Make the mixture in a separate container and then pour into the tea maker up to the
MIN (0.5L) mark.
1. Let the solution soak in the tea maker for about an hour, and then bring it to the boil.
2. Discard the water and thoroughly rinse out the tea maker with fresh water.
Alternatively, you may use a commercially available kettle cleaning solution from the
supermarket. Please follow the instructions provided with the cleaning solution.
