* Before taking out the tea filter, wait for the temperature to cool down.
*
CAUTION! The heating element and surfaces are subject to residual heat after use.
*
WARNING
– Avoid water spillage on the electrical connectors.
* WARNING
– Potential injury from misuse.
* WARNING
– Do not remove the lid while the water is boiling.
IMPORTANT!
* To prevent damage from any steam escaping from the appliance turn the spout away from
furniture, walls, wallpaper and overhead cabinets or other items.
* Do not use caustic, aggressive or abrasive cleaning products for cleaning.
Keep hard items away from the appliance.
* Although the appliance is protected from boiling dry, it must never be operated without water.
* If the overheat cut-out switch switches OFF the appliance to prevent overheating and boiling
dry, proceed as follows:
- Remove the appliance from the base.
- Allow the appliance to cool down for at least 15 minutes before refilling it with cold water and
replacing the appliance back on the power base.
* Only use the appliance with the power base provided.
* Furniture today is often coated with a wide range of varnishes and plastics and is treated with
various protective substances. Some of these products may contain substances that react
adversely with the rubber feet on the power base, soften them and cause staining on the
surface. Therefore, we recommend placing a non-slip mat under the rubber feet on the power
base.
--USE
—
Unpacking
DANGER to children- danger to life due to suffocation/swallowing
Keep the packing material out of children's reach. Dispose of it immediately.
* Carefully remove all parts from the packaging and check that no parts are missing or possibly
damaged.
* Remove all packaging material.
First time use
IMPORTANT! During the below process, DO NOT fill the tea maker more than the MIN
(0.5L) mark on the tea maker. Filling above the MIN mark will cause overboiling and
spillage out of the spout.
To ensure a long service-life of the tea maker, proceed as follows before using it for the first
time:
