Page
12
of
16
•
After cleaning, the water tank and pipes etc. need flushing out with clean
water. To do this, fill the water tank with fresh clean water wait for approx.
30 seconds for the unit to heat and then tilt the handle back, so that it
disengages from the floor head lock position, to start the steam. Allow all
the water to be used up to ensure a good flush.
Note
: After each lime scale removal we recommend performing a test clean
on a suitable isolated area to ensure that there is no debris left in the
system.
10 Completion and Storage
•
After you have finished using the appliance, switch off and
unplug from the power point and allow the appliance to fully
cool down.
•
When cool, empty the water tank.
•
Remove the micro fibre pad and clean. (refer to User
Maintenance section)
•
Wind the power cord on to the side hooks as shown.
To quickly release the power cord, the top hook can be rotated to allow the
power cord to slip off as shown:
Summary of Contents for JC-230
Page 1: ...Steam Mop User Manual Model No JC 230 Rev 1 READ AND SAVE THESE INSTRUCTIONS...
Page 2: ...Page 2 of 16...
Page 14: ...Page 14 of 16...
Page 16: ...Page 16 of 16...
