5
HOW TO USE
Plug unit in to a 220-240V AC electrical power outlet. Press the POWER ON/OFF button to
switch the unit ON. To switch OFF, press the POWER ON/OFF button again.
ATTENTION:
When the water in the tank is almost empty, the unit will shut off automatically,
and tank empty indicator will turn ON, to remind user to refill with water.
Mist Increase/Decrease Button
Mist adjusts from Lowest output to Highest output. To increase the mist output, press the
MIST INCREASE button. The corresponding Mist Level will be light on the LED display. To
decrease mist output, press the MIST DECREASE button.
Light On/Off button
Turn on or off the LED light at the bottom of the water tank.
Timer set button
The timer will cycle through the following settings 00hr, 1hr, 2 hr, 3 h
r….12hr.
Press the TIMER button to activate the timer. The timer setting indicator on LED display will
read “00 H”. To select the desired timer setting, keep pressing the TIMER button until the
desired timer setting is shown on the display. To turn the timer OFF, press the TIMER button
until
“00 H” is shown on the display.
REMOTE CONTROL
Note: Require 2 AAA batteries (not included).
The humidifier comes with a remote control for your convenience.
The functions on the remote control are the same as the buttons on the humidifier.
To install the batteries, first remove the battery cover on the remote control by sliding the
battery cover back.
Install the batteries in correct polarity inside the battery compartment matching the polarity
shown and then refit the battery compartment cover securely.
To prevent overheating DO NOT mix new and old batteries in the remote control.
To prevent corrosion, remove the batteries if the remote control is not used for a long period
of time.
HOW TO FILL
CAUTION:
Before filling water, turn the power off and unplug the unit from the mains power.
NOTE
: Always use two hands to carry the water tank
1. Remove the mist nozzle and Lift up water tank from
humidifier base
