6
2. Turn the tank upside down and remove the tank cap by
turning it counter-clockwise
3. Fill the water tank with clean, cool (not cold) water.
Note: We recommend using distilled water if you live in a
hard water area.
4. Replace the tank cap by turning it clockwise until tight.
(refer step 2)
5. Install the water tank back on the base unit. Make sure the
tank is firmly seated.
6. Replace the mist nozzle
Note: It is normal to have small amount of water in the tank
base during and after use.
CLEANING AND CARE
Caution: Before cleaning the unit, turn off the unit and unplug from the mains power.
•
Perform regular maintenance on the ultrasonic membrane.
•
Never use detergent to clean the ultrasonic membrane.
•
Never clean the ultrasonic membrane by scraping with a hard object.
To Clean the Tank
Remove the water tank from the humidifier base by lifting it from the main unit. Unscrew the tank
cap and rinse inside the tank with clean water. To remove any build-up of scale, use a 50/50
mixture of vinegar and lukewarm water and leave it in the water tank for 30 minutes. Discard the
mixture and rinse out the water tank to clean the inside of the tank. Then fill it with fresh water.
Suggestion:
Clean the water tank once every two to three weeks, depending on your water conditions.
To Clean the Ultrasonic Membrane
Pour a 50/50 mixture of vinegar and water on the surface of
the ultrasonic membrane, then soak for five minutes. Clean
with a soft-bristle brush (not included) and rinse.
NEVER
touch the ultrasonic membrane with your fingers as
the natural oils in skin can damage the membrane.
Suggestion:
Clean the membrane once every two to three
weeks, depending on your water conditions.
CAUTION: For electrical safety, never submerge the
base in water or any other liquid.
To Clean the Surface
Clean the surface of the unit with a clean damp soft cloth as often as needed.
