18
|
3. Possibility
Note:
For this cable routing option you need
a power drill.
• Mark the location on the selected surface
(e.g. tabletop, metal plate, etc.) which is to
be provided with a hole for the cable
• Now drill the suitable hole.
• Lead the cable from the top, first outside
the pipe through the upper cable cutout
and then down through the pipe and
through the hole previously drilled.
4. Possibility
• Insert the cable from above initially outside
the pipe through the upper cable cutout
and then through the lower cable cutout of
the pipe back out again
3.3. Slider-solution
3.3.1. Version with lock
• In the home position, the slide (a) is fixed
firmly at the stopper by a lock .