Copyright © 2019 AudioNote Kits
www.AudioNoteKits.com
[email protected]
Page 43
4.4 Wiring the RCA Jacks and Volume Pot Ground
We are now going to make the Ground connection between the RCAs and the Volume Pot. Read
this section completely through before completing the steps.
Take the Black insulated solid core wire supplied with the kit and lay it out parallel to the
horizontal plane of the chassis across and between the RCAs, as shown below,
with the long
end of the wire in the middle of the chassis, not the edge.
Strip the insulation off such that the exposed copper can be laid over the ground tabs.
Tin the section of exposed copper wire by adding solder to it.
Position the wire such that it can be soldered to the ground tabs so that they are all
connected. It's tricky, so don’t rush it — take your time!
