Copyright © 2019 AudioNote Kits
www.AudioNoteKits.com
[email protected]
Page 33
Push the crimped ends of the Red and Black wires coming from the IEC PCB onto the left lugs
of the rocker switch, Red on top, Black below. Apply the pressure necessary to position the
wires correctly onto the lugs.
Using the prepared Blue–Brown twisted and crimped pair of wires, connect the IEC socket
— Blue (Neutral) from the middle lug, Brown (Live (Hot)) from the top lug — to the right
lugs of the rocker switch, Blue on top, Brown below. Again, apply the pressure necessary to
position the crimps correctly onto the lugs.
Here's a picture of the IEC PCB, without the plastic insulating board (which we'll install in a
moment).
Take the Green wire that is prepared at one end with a ground lug and at the other end with
a crimp. Attach it to the bottom lug of the IEC socket.
