23
17.2 Setting position of feed dog
Adjust the position of feed dog in the needle
plate groove
•
Loosen the screws (5),(8),(9),(12), move
the shaft of feed left and right to keep the
feed dog in the centre of needle plate
groove (add the picture of needle plate
and the feed dog), then tighten the screw
(8),(9),(12).
•
Adjust the position of feed transfer (14)
to the feed shaft (7), loosen screw
(2),(3),(4),(5),(10) to keep feed transfer
locate in the center of feed shaft (7)
groove, then tighten the screws
(2),(4),(5),(10)
www.garudan.cz
