37
24) LUBRICATION BY OIL
For lubrication of the machine use only oil recommended by manufacturer/supplier or
oil with the following specification:
- Viscosity at 40°C = 10mm/s
- Flash point = 150°C
Maintenance work
Description
Operation period
Lubrication of head
Machine head is equipped with
wick feed oil central lubrication
system. Bearings are lubricated by
oil from the oil tank.
Level of oil must be maintained
above the mark of minimum oil
level 1 on the oil tank.
Fill the oil to the tank up to the
mark of maximum oil level 2.
8
Attention: danger of injury!
Oil can cause skin rashes.
Try to avoid contact with skin. After contact of oil with skin, rinse the affected place
properly.
Manipulation and disposal of mineral oils is subjected to valid legislation. Used oil
should be handed over to authorized waste center. Be careful not to spill the oil.
1
2
www.garudan.cz
