© ANITA
MP03500EN_180831
20
17. ADJUST THE HEIGHT OF INNER PRESSER FOOT & NEEDLE BAR
Fig. 17
1.
ADJUSTING THE HEIGHT OF INNER PRESSER FOOT:
First loose the screw (shown as A) and push the rocking arm forward (shown as B) for lifting more
height of inner presser foot and then tighten screws back. Conversely, to push it backward (shown as
C) for descend it height. And then tighten screws.
2.
ADJUSTING THE HEIGHT OF NEEDLE BAR:
First loose the fixed screw (D), pull up or press down needle bar for adjustment tighten the screw
after adjustment.
*** THE LOWEST STATION OF NEEDLE SHARP:
First turn pulley let needle to descend to the lowest position, the needle sharp into shuttle´s
hole too long, it will lead to twist or disconnection thread.
Please loose the needle bar´s fixed screw before adjustment and tighten the fixed screw after
adjustment.
www.garudan.cz
