© ANITA
MP03500EN_180831
11
8. MACHINE´S ADJUST (THE OPPOSITE STATION OF NEEDLE AND SHUTTLE
(STEP 1)
Fig. 8
1.
First, push the bottom (A), and turn the wheel clockwise by hand, until you hear a “KA” voice.
Second, to turn the wheel counterclockwise by hand to make the distance of inner presser
foot stitch length to zero and loosen the (A).
2.
Move the needle bar at the lowest station and loose the belt (#603).
3.
Turn the wheel clockwise by hand to make needle bar lift about 3 mm
4.
Please attend the transmissive gear-box in triangular base, the groove on shaft’s (#566) top
and the make on cover (#564) must on a line. If not on line, then put the belt (#603) into the
gear. If it needs to be adjusted, please adjust (MB060012) of (#756) slightly.
www.garudan.cz
