© ANITA
MP03500EN_180831
15
12. ADJUSTING THE ELASTICITY OF THREAD CONTROLLOR DISC
Fig. 12
(ADJUSTING THE CONTROL SPRING): The arc-plate (A) under control spring is to decide the lowest
station of spring. In adjusting, to loosen the fixed screw (B) first, and move plate to needful station,
and then tighten the screw. When you need to adjust the elasticity of pull-thread, please loosen fixed
screw (C) first, and use screwdriver insert the groove on axis´s top. To turn counter clockwise (shown
as arrow D), and then tighten screw for more elasticity or to turn clockwise (shown as arrow E) for
less elasticity.
(ADJUSTIVE RULE): The thread must be kept on straight line, tensional situation.
www.garudan.cz
