ANITA ©
MP00800EN_161116
17
B.
Set the position of the driver
(6
)
in value 17mm from the edge of presser bar
(
9)
. At
tightening the screw
(
5)
check the position of the needle in the middle of sub
presser foot
(
7), Fig. 25, 27.
C.
Loose
n
safety screw
(
4), Fig.
26 and set the screw
(
12)
to the end right position in
round slot of the lever, Fig.
25.
D.
Set the screw
(11
)
so that there is touch with stopper of hand screw
(10
), Fig.
25.
E.
Set the play between driver of presser bar
(6
)
and bushing of presser bar
(8
)
in value
9mm, Fig.
27. After that tighten the screw
(
4), Fig.
26.
F.
Tighten all srews carefully.
G.
Set needed height of the stroke of sub presser foot
(
7). This is done by moving of
the screw
(
12)
in round slot of the lever, Fig.
25.
H.
The height of presser foot
(
7)
is set in comparison with
thickness of the material by
hand screw
(10
)
.
Summary: sub presser foot
(
7)
should be moved with delay in value 5mm of trace of the
needle in moving from lower reversal point. The sub presser foot may not be in touch with
the materials at movement of the
material when the needle is over the material.
5 . PROGRAMMABLE PRESSER FOOT
The machine could be equipped by programmable
presser foot
-
parameter
34 ON/OFF.
The parameter is controlled by pneumatic valve
(1
)
.
The height of presser foot is set by
screw
(
2)
.
The height of programmable presser foot is set by
screw
(
3), Fig.
28.
Fig.
28
6. THREADING OF UPPER THREAD
Lead the thread from thread stand to guides
(1
)
on the head of the machine. After that
thread through silicon oil bottle for lubrication. After that thread through tensioner
(
3), guide
(
4), tensioner
(
5)
and spring
(6
), guide
(
7)
which is under the spring
(6
), needle lever
(8
),
guides
(
9)
and
(10
)
and guide
(11
)
to the needle. Please keep the direction to the needle
(
12),
Fig.
29.
www.garudan.cz
Summary of Contents for Garudan GPS/G-3525 Series
