Anita Garudan GPS/G-3525 Series, User'S Manual And Spare Parts Book

Page: 10 / 87

ANITA ©
MP00800EN_161116 10
5. INSTALLING AND REMOVING THE SHUTTLE CASE
Hold out lever of the the shuttle case and
insert the the bobbin case until its lock fits in
the groove of the shaft, ending up clicking,
see fig. 10 .
[Notice]
If the shuttle is not correctly installed,
machine can be damaged during operation
Fig . 10
6. THREAD TENSION ADJUSTMENT
A. Needle thread tension adjustment, fig . 11:
As the Figure shows, turn screw (1 ) of the main
tensioner clockwise to
increase the tension, while counterclockwise to
reduce the tension. Additional tensioner (2) is
used for final adjustment of the end of needle
thread after trimming.
B. Bobbin thread tension adjustment, fig . 12:
As the figure shows, turn screw 1 clockwise to
increase the tension, while counterclockwise to
reduce the tension.
Fig . 11
Fig . 1 2
www.garudan.cz