Anita GARUDAN GF-2131-443 MH/L34, User Manual And Spare Parts List

Page: 10 / 63

ANITA ©
MP00400EN_171102
10
4.5 Adjusting the oil in the pump
In the standard state, bypass hole (2) is fully closed
with the adjusting plate (1). The wider bypass hole
(2) is opened, the less the oil quantity becomes.
See fig.7.
Fig.7
4.6 Installing the synchronizer
Screw whirl stop (5) into the tapped hole in the
arm in the fig.8 and fix it with nut (6).
Determine upper and lower stop position of the
needle by adjusting the angle of the synchronizer
(see more details in operation manual of the
servomotor).
Fig.8
4.7 Installing the belt cover and the bobbin winder
Bore wood-screw guide halls A,B,C,D in the table-top. Fit belt cover struts (1) and (2) in
tapped holes in the machine arm. Adjust position of bobbin winder (3) and fix it in guide
holes A and B with wood screws. Temporarily fix belt cover C (4) in guide holes C and D.
Mount belt cover A (5) and belt cover B (6) to struts (1) and (2). Adjust the position of belt
cover C (4) and fix it with the wood screw. See fig.9
Fig.9
www.garudan.cz