Anita GARUDAN GF-2131-443 MH/L34, User Manual And Spare Parts List

Page: 9 / 63

ANITA ©
MP00400EN_171102 9
Fig.3
4.3 Lubrication
Fill the oil tank with oil up to line „H“ (1). Carry out periodical inspection while the sewing
machine is in use to check the oil quantity. If the oil surface level is below line „L“ (2), add oil
until the oil surface reaches line „H“ (2), see fig.4. Use „spindle oil“.
Run the sewing machine to check how oil splashes on oil sight glass (1). See fig.5.
Fig.4 Fig.5
4.4 Adjusting amount of oil in the hook
Turn screw (1) to adjust the oil quantity. Turning
screw (1) in the „+“ direction increases the oil
quantity, or in the „-„ direction decreases it. See
fig.6. After adjusting the oil quantity with the
screw, run the sewing machine idle for 30 seconds
or more. Then, check the oil being splashed from
the hook. Fig.6
www.garudan.cz