Anita Garudan GF-1130-448 MH/L34, User Manual, Page: 12 / 71

© ANITA
MP05300EN,MP05400EN_200120 GF-1130-448,GF-2230-448 MH/L34 12
D2.2. Winding the bobbin
1. Put the bobbin on the winding pin. Pass the thread through points
① to ③ and wind the
end of the thread a few times around the bobbin.
2. Press the winder lever
Ⓐ
. Press the foot controller and machine will start winding. When
the bobbin is full, winding stops automatically.
3. You can adjust the amount of thread by the metal plate screwed on to the winder lever A.
Loosen the screw and adjust position of the plate to stop winding at 80 % of the bobbin
capacity.
4. It’s necessary to wind the thread evenly. Center the thread tension
Ⓒ
, adjust the position
forward / backward and tighten the screw
Ⓓ
.
www.garudan.cz