Anita Garudan GF-1130-448 MH/L34, User Manual, Page: 10 / 71

© ANITA
MP05300EN,MP05400EN_200120 GF-1130-448,GF-2230-448 MH/L34 10
D OPERATING INSTRUCTIONS
D1. REPLACING THE NEEDLE
Turn off the main power switch. Replace the needle only when the sewing machine is off.
For 1-needle machine GF-1130:
Turn the hand wheel to rise the needle bar 1 to the
highest position.
Loosen the screw 2.
Pull out the needle from the needle bar 1
downwards.
Insert new needle into the opening in the needle
bar 1 all the way up with the groove 3 to the right.
Tighten the screw 2.
For 2-needle machine GF-2230:
Turn the hand wheel (CCW) to rise the needle bar
1 to the highest position.
Loosen the screw 3.
Pull out the needle from the needle holder 2
downwards.
Insert new needle into the opening in the needle
holder 2 all the way up with the groove of the
right needle 4 to the right and the groove of the
left needle to the left (as shown).
Tighten the screw 3.
When changing the needle size, you must adjust the distance of the hook to the needles,
otherwise it will lead to malfunctioning:
Using the smaller size of the needle:
- Skipping the stitches
- Damaging the thread
Using the larger size of the needle:
- Damaging of the tip of the hook
- Damaging the needle
www.garudan.cz