8. TEMpERaTuRE pRoTECTIoN
There is a temperature protection in the machine that can be accessed from the outside of the machine.
This protection is located at the back of the machine (fig. 1-6). It is activated when the temperature gets
too high. The most common cause for activating the security is scale that has not been removed in time.
If the temperature protection is activated, you should proceed with the following steps:
1.
Let the unit cool down.
2.
Unscrew the black protection cover.
3.
Push the button that now appears, replace its black cover and fasten it tightly.
If the protection was triggered due to scale formation, then proceed according to section 7.1.
When the scale formation was not the cause, then please contact your dealer.
9. TRaNspoRT
The transport of the machine should be done as follows:
1.
Switch the machine off and remove the plug from the wall socket.
2.
Close the tap of the cold water supply and disconnect the water hose (VA).
3.
Remove the cover of the reservoir.
4.
Turn the machine upside down to let the remaining water out above the sink.
5.
Place the cover again.
6.
The machine is now ready for transportation.
7.
Proceed with section 3 “INSTALLATION” to re-install the machine.
2015/02 Rev. 1.0
M-LINE
20
GB