9. TEMPERATURE CUT-OUT
The appliance is fitted with a temperature cut-out
that can be reached from outside. It is located at
the back of the appliance, next to the permanent
water connection. The cut-out switches the
appliance off if the temperature is too high. The
most common cause for the cut-out operating is
that scale has not been removed in time.
If the cut-out operates, proceed as follows:
1.
Let the appliance cool down.
2.
Unscrew the black protective cover.
3.
Press in the button that is now visible
and replace the protective cover tightly.
If the cut-out had operated because of excessive
deposits of scale, proceed as described in section
8.2
If a stoppage is not caused by the temperature
cut-out, consult your dealer.
10. TRANSPORT
The following procedure should be followed when
the appliance is transported:
1.
Switch the appliance off.
2.
Remove the plug from the wall socket.
3.
Close the water supply tap and
disconnect the supply hose.
4.
Remove the sliding filter and the drip tray.
5.
Remove the cover and remove the
transparent blender tray vertically from
the reservoir.
6.
Empty the appliance into the sink.
7.
Open the hot water tap.
8.
Replace all the components that have
been removed.
9.
The appliance is now ready for
transport.
10.
When it is relocated, the procedures of
Section 3, Installation, should be
followed.
Animo
7
09/99
TVB 200 W
