background image

50

06/2011 Rev. 7.4        

M o d e l   2 0 0 9

06/2011 Rev. 7.4

51

M o d e l   2 0 0 9

2. MENU 

STRUCTURE

2.1  The operator/service menu

The majority of settings, including product settings, are protected by a PIN code. This PIN code 
ensures that users do not gain access to the service menu.

It is recommended not to leave this document with the user after installation and to change the 
standard factory PIN code.

This section describes how the various settings can be changed by 

trained, authorized service staff.

 

You can read about how to gain access to the service menu below. On access to the 

service menu

 

the control panel has the following functions:

Summary:

      Display

Operator menu

Service menu

Make your choice

1.0

Free dispensing

2.1

Quick recipe Pro

1.1

Clock

2.2

Button settings

1.2

Timer settings

2.3

Recipe settings

1.3

Recipe counters

2.4

Settings

1.4

Quick recipe

2.5

Reset counters

1.6

Software

2.6

Descale /  lter

1.7

PIN-code

2.7

Hardware test

2.8

Read log

2.9

Clear log

2.10

Load defaults

2.11

SD menu

2.12

Change PIN code

2.2 The operator menu

Operator menu

Main item

Sub item

Item

Range

Set

Description

1.0 Free dispensing

Yes/no

Yes

Set the device to free or paid dispensing here.

1.1 Clock

Time

HH:MM

Set the clock to the correct local time here.

Date

DD-MM-JJJJ

Set the clock to the correct local time here.

1.2 Timer

Mon-Fri

On       00:00
Off       00:00  

Set the time when the device should operate here. If 
the timer switches off the device it will automatically 
revert to standby mode.

Sat

On       00:00
Off       00:00

Sun

On       00:00
Off       00:00

1.3 Recipe counters

Recipe  1

Recipe  10

Total

Off       00:00

Total counter for recipe 1 (free-paid-jugs)

Free

Cups

Number of free dispensed drinks (recipe 1)

Paid

Cups

Number of paid dispensed drinks (recipe 1)

Jug

Cups

Number of dispensed jugs (recipe 1)

Recipes total

Total

Cups

Total counter for all dispensed recipes

Free

Cups

Total counter for all free dispensed recipes

Paid

Cups

Total counter for all paid dispensed recipes

Jug

Cups

Total counter for all dispensed jugs

Rinse counter

Mixer(s)

Number of mixer rinses

Reset counter

Total rest of all counters

1.4 Quick recipe

Recipe name  1

Recipe name  10

Cup volume

50-250 ml

120ml

Use this for setting the volume and strength of cof-
fee, milk, sugar and cocoa easily per recipe (drink 
button).
Only the ingredients applicable to the recipe are 
shown.

Ingredient 1

-20 / +20%

0%

Ingredient 2

-20 / +20%

0%

Ingredient 3

-20 / +20%

0%

Ingredient 4

-20 / +20%

0%

1.6 Software

Software version is readable here.

1.7 PIN-code

2-2-2-2-2

PIN code = press the number 2 key  ve times.

 

 

 

Escape 

(back without con rming any changes)

Previous 

(menu item / increase value)

Next 

(menu item / decrease value)

Enter 

(con rm menu choice)

Test 

(press for 1 sec.)

From Software V4.00 the menu items are bounded in a 
‘loop’

To leave the Operator menu; press the X-button ones.

To leave the Service menu; press the X-button twice. 
This means its not necessary anymore to press the 
menu button on the inside of the service key panel when 
leaving the menu.

When changes where made a long beep-signal follows 
to indicate that the settings are stored in the memory.

TEST

PIN: 2-2-2-2-2

X

X



Summary of Contents for OPTIVEND 2009
























Reviews: